Total: $0.00
Taxes and shipping calculated at checkout
Brand: Bare & Boho
- Product Info
- Fitting Guide
- Washing Guide
- Night Time Fitting Guide
Product Info
A contoured pad that is added to your nappy on top of your inserts to add an extra layer of absorbency for heavy wetters, naps or overnight use.
Consisting of four layers of super thirsty bamboo-cotton fleece, becoming an extremely efficient pad providing added protection. Shaped to provide a snug fit around baby’s inner thighs and to minimize bulk between thighs.
Available in dual sizing: Newborn 1-5 kg or One-size 4-18 kg.
Fitting Guide
1. SNAP INSERT
Snap elasticated insert in to lining of your nappy shell.
2. BOOSTER (optional)
Creates four additional thirsty layers. Lay booster flat over insert, or fold and position the booster in front / rear where extra absorbency is required.
3. TRI-FOLD (optional)
Creates nine additional thirsty layers. Fold thrice and snap/lay tri-fold directly in the shell. Used as an alternative to the insert /booster option. Please also refer to the Night Nappy Guide for function.
4. FIT
Lay baby on open nappy shell, with back of nappy shell sitting 1-2cm above bottom crack. Pull front panel to sit comfortably just below belly button. Bring side waist tabs up and around baby for a snug fit. Snapping the extra hip snap is optional on larger bubs with chunky thighs.
5. ADJUST
Shorten nappy if needing a trimmer fit for your baby, via the varied rows of snaps,
situated on the front groin panel of nappy shell. To adjust, select a suitable row of snaps below the waist snaps. Connect the row by lifting upwards, and snap into the top row.
6. PUSH
Once groin snaps have been suitably adjusted, push any excess fabric between the
row of snaps upwards, to tuck in neatly.
7. TUCK
Run a finger along inside of groin elastics and pull out both shell and insert gussets, to ensure insert sits flat. Tuck groin elastic back in to baby’s underwear line.
8. CHECK
Ensure no gaps around back or inner thighs, and two fingers width in between front panel and baby’s tummy so there is some space for when baby is sitting up.
Washing Guide
WASHING INSTRUCTIONS:
1. Hand-rinse and dry-pail end of each day:
Shake/scrape/rinse solid waste off inserts in to toilet. Use soft silicone scrub brush to remove waste off inserts, shells and elastics. Use soap bar such as ‘Tuff Stuff’ to gently agitate any stains. (Remove net from bar for gentler agitation). Squeeze water out, place in the dry-pail*, until machine wash day.
2. Rinse Cycle Every 1-2 Days:
30-45 Min. Max 40-60 degrees. Designed to remove excess soiling. (1/2 dose recommended detergent for your machine). Select cycle which removes soiled water.
Dry-pail if not following wash with the main cycle immediately.
3. Main Cycle Every 2-3 days:
2-3 Hour (Cottons/Heavy Duty). Max 40-60 degrees. Use recommended dosage of detergent for your load size. Double dosage for recommended eco-detergents.
4. Drying:
Line dry in direct sunlight. Tumble-dry or portable clothes airer suitable (excluding nappy shells, shade dry only. Do not tumble-dry shells or place in direct sunlight as this can cause damage long term and void warranty.)
*Before drying, stretch all wet inserts to maximum shape.
RECOMMENDED NATURAL DETERGENTS:
(Double dose) Kin Kin Naturals, Ecostore Laundry Powder
Night Time Fitting Guide
Option 1:
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Trifold
Option 2:
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Trifold
Layer 3 - Booster
Option 3 (Ideal for Boys)
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Insert
Layer 3 - Trifold
Layer 4 -Booster (Fold & Place Booster at front for boys)
You may also like...
