Bare and Boho - Reusable Bamboo Cloth Inserts (5 pack) Sale
- Regular price $40.95
Brand: Bare & Boho
- Product Info
- Fitting Guide
- Washing Guide
- Night Time Fitting Guide
Designed for day use to absorb soiling. Changing recommended between 2-6 hours. 4 Layers of absorbent fabric with Double-Layered Side gusseting around the thigh contour for maximum anti-leak protection.
The “Stay Dry “Bamboo-cotton with quick dry Microfleece top layer. The Bamboo based Stay-dry Insert is slightly more affordable which can impact on decision making, and although stems from a natural source being the bamboo plant, it does undergo extensive processing to convert to a fibre. Bamboo Inserts are blended with cotton, so there are no other added synthetic blends. Bamboo-Cotton does also make for an absorbent and thirsty fabric. With the added benefit of the top layer being microfleece, this insert will not feel wet for your little one as opposed to our natural fibre Hemp insert alternative. Microfleece wicks away moisture.
Available in dual sizing: Newborn 1-5 kg or One-size 4-18 kg.
1. SNAP INSERT
Snap elasticated insert in to lining of your nappy shell.
2. BOOSTER (optional)
Creates four additional thirsty layers. Lay booster flat over insert, or fold and position the booster in front / rear where extra absorbency is required.
3. TRI-FOLD (optional)
Creates nine additional thirsty layers. Fold thrice and snap/lay tri-fold directly in the shell. Used as an alternative to the insert /booster option. Please also refer to the Night Nappy Guide for function.
4. FIT
Lay baby on open nappy shell, with back of nappy shell sitting 1-2cm above bottom crack. Pull front panel to sit comfortably just below belly button. Bring side waist tabs up and around baby for a snug fit. Snapping the extra hip snap is optional on larger bubs with chunky thighs.
5. ADJUST
Shorten nappy if needing a trimmer fit for your baby, via the varied rows of snaps,
situated on the front groin panel of nappy shell. To adjust, select a suitable row of snaps below the waist snaps. Connect the row by lifting upwards, and snap into the top row.
6. PUSH
Once groin snaps have been suitably adjusted, push any excess fabric between the
row of snaps upwards, to tuck in neatly.
7. TUCK
Run a finger along inside of groin elastics and pull out both shell and insert gussets, to ensure insert sits flat. Tuck groin elastic back in to baby’s underwear line.
8. CHECK
Ensure no gaps around back or inner thighs, and two fingers width in between front panel and baby’s tummy so there is some space for when baby is sitting up.
WASHING INSTRUCTIONS:
1. Hand-rinse and dry-pail end of each day:
Shake/scrape/rinse solid waste off inserts in to toilet. Use soft silicone scrub brush to remove waste off inserts, shells and elastics. Use soap bar such as ‘Tuff Stuff’ to gently agitate any stains. (Remove net from bar for gentler agitation). Squeeze water out, place in the dry-pail*, until machine wash day.
2. Rinse Cycle Every 1-2 Days:
30-45 Min. Max 40-60 degrees. Designed to remove excess soiling. (1/2 dose recommended detergent for your machine). Select cycle which removes soiled water.
Dry-pail if not following wash with the main cycle immediately.
3. Main Cycle Every 2-3 days:
2-3 Hour (Cottons/Heavy Duty). Max 40-60 degrees. Use recommended dosage of detergent for your load size. Double dosage for recommended eco-detergents.
4. Drying:
Line dry in direct sunlight. Tumble-dry or portable clothes airer suitable (excluding nappy shells, shade dry only. Do not tumble-dry shells or place in direct sunlight as this can cause damage long term and void warranty.)
*Before drying, stretch all wet inserts to maximum shape.
RECOMMENDED NATURAL DETERGENTS:
(Double dose) Kin Kin Naturals, Ecostore Laundry Powder
Option 1:
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Trifold
Option 2:
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Trifold
Layer 3 - Booster
Option 3 (Ideal for Boys)
Layer 1 - Outer nappy (variety of designs available)
Layer 2 - Insert
Layer 3 - Trifold
Layer 4 -Booster (Fold & Place Booster at front for boys)